Snapshot-Mode - Help

Snapshot-Mode allows you to get the most out of you Mobile MotionTracker software. By starting off motion screen is showing some essential actual settings. Start tracking motion by clicking 'Activate' softkey. Soon there will start a countdown which gives you some time to place your phone properly. When motion is tracked the software will start playing a fun sound and is showing some more information like time and date of snapshot (only on large screens). Click 'Deactivate' if you want to turn off activated mode (this will reset countdown and limit too).    

You can save an actual motion snapshot manually by going to 'Load/Save Picture' menu. 
Please see 'Options' menu for further settings.

Tracking Settings (Options):
Here you can adjust all settings that affect motion tracking itself. Use 'Continuous Tracking' if you want to make more than one snapshot. In that case you can set a limit number of snapshots to be made. Accuracy of motion tracking can be set by 'Motion Threshold' and 'Scan Time'. By setting threshold you can determine at which motion level you want to start tracking. 'Scan Time' controls the frequency of parsing camera input. A faster 'Scan Time' might be more suitable for fast movements. Setting a higher value might be good enough for slower movements and saves processing power. Please note that overall accuracy of motion detection is also dependent on your phones hardware.

E-Mail Settings (Options):
Mobile MotionTracker allows you to send motion snapshots by mail! You can activate this option by clicking 'Yes'. If you want to deactivate this option then click 'No'. To use this service, you must enter a valid e-mail adress on next screen. After that Mobile MotionTracker wants to establish a connection to a mail-server. If anything went alright, you will get a status message. Now start snapshot-mode. If you use 'Continuous Tracking' (see 'Tracking Settings') then each time motion is tracked your software will send out an e-mail with attached motion snapshot (until set limit is reached). Otherwise you will get only one snapshot by e-mail. The upload size of e-mails will depend on your camera resolution (see 'Cam Settings').  Some phones might not be able to upload large pictures due to traffic limits. Ask your phone retailer about details on traffic limits and how to enhance them. Please note: Sending e-mails will cause traffic cost charged by your operator! Ask your operator for more information. Make sure you have the right GPRS or UMTS settings. During mail upload motion sensor is deactivated and will therefore not tracking any motion. After mail upload is successful MotionTracker will be again activated automatically (if using 'Continuous Tracking').              

Cam Settings (Options):
Use this menu to adjust snapshot size. If your phone does not accept selected size it will use default settings. Please be carefull with changing size as it may affect accuracy of motion tracking. If you want to auto-save each motion snapshot made then click this option, otherwise you have to save snapshots manually. 

Sound Settings (Options):
This menu allows you to adjust motion sounds and countdown sound. If 'Countdown Sound' is activated you will get an acoustic information while counting down - so you can notice by ear when tracking sensor is activated. You can set different Alarmsound-Types which will be played three times each time motion is tracked. Pitch of sound is affected by actual motion level.          

Support: MotionTracker@qioo.com 
 QIOO.COM